Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Apparent density | | 内部方法 | 0.39 g/cm³ |
| Chlorine content | | ISO 1158 | 35.0 wt% |
| oils | | 内部方法 | 3.0 phr |
| ash content | | ISO 247 | <2.0 % |
| Volatile compounds | | ISO 248 | <0.30 % |
| Average particle size | | ISO 2591-1 | 250 µm |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| particle size distribution | | ISO 2591-1 | 0.25 mm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 37 | 1.6 MPa |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| melt viscosity | | ISO 11443 | 2900 Pa·s |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|
| melt viscosity | | ISO 11443 | 2900 Pa·s |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 37 | 1.60 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Fusion temperature | | 内部方法 | <2.00 J/g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices