
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | No Break | |
| -30℃-30°C | ISO 179/1eU | No Break | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Nominal tensile fracture strain | ISO 527-2/1A/50 | > 200 | % | |
| tensile strength | BreakBreak | ISO 527-2/1A/50 | 40 | Mpa |
| Tensile modulus | ISO 527-2/1A/1 | 1200 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | B50-- | ISO 306 | 100 | °C |
| A50-- | ISO 306/A50 | 200 | °C | |
| Hot deformation temperature | 0.45 MPa,Unannealed0.45 MPa,Unannealed | ISO 75-2/Bf | 70 | °C |
| 1.8 MPa,Unannealed1.8 MPa,Unannealed | ISO 75-2/Af | 55 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183/A | 1.01 | g/cm³ | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| Ignition temperature of heating wire | 3 mm3.0 mm | IEC 60695-2-13 | 750 | °C |
| 1.5 mm1.5 mm | IEC 60695-2-13 | 750 | °C | |
| Glow wire combustion index (GWFI) | 3.0 mm3.0 mm | IEC 60695-2-12 | 725 | °C |
| 1.5 mm1.5 mm | IEC 60695-2-12 | 725 | °C | |
| Flammability level | UL 94 | HB | ||
| UL 94 | HB | |||
| Burning rate | ISO 3795 | 30 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.