PP RP340N
0
- Properties:Injection grade
- Usages:Daily productshigh-definition containersfood containers
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending elasticity coefficient | ASTM D-790A | 1050 MPa | |
| Einstein impact strength | ASTM D-256A | 85 j/m | |
| Falling point elongation rate | ASTM D-638 | 12 % | |
| Tensile strength at the point of surrender | ASTM D-638 | 28 MPa |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTM D-648 | 14 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-648 | 83 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top