Share
Add to compare

Phenolic LONGLITE® PMC T376J Chang Chun Plastics Co., Ltd. (CCP Group)

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Charpy Notched Impact Strength--ASTM D2563.4kN/m
Charpy Notched Impact Strength--JISK71113.4kN/m
Impact strength of cantilever beam gap--ASTM D2562.9kN/m
Impact strength of cantilever beam gap--JISK69112.9kN/m
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating0.60mmUL 94V-0
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
tensile strengthJISK691156.0MPa
bending strengthASTM D79095.0MPa
bending strengthJISK720395.0MPa
tensile strengthASTM D63856.0MPa
compressive strengthASTM D695210MPa
Compressive stressJISK6911210MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature1.8MPa,UnannealedJISK7207190°C
RTI ElecUL 746150°C
RTI ImpUL 746150°C
RTI StrUL 746150°C
Hot deformation temperature1.8MPa,UnannealedASTM D648190°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Shrinkage rate--JISK69159.5%
Shrinkage rate--ASTM D9559.5%
Water absorption rate24hrASTM D5700.16%
Water absorption rate23°C,24hrJISK69110.16%
densityASTM D7921.56g/cm³
densityJISK71121.56g/cm³
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Dielectric strength--ASTM D14913kV/mm
Dielectric strength--JISK691513kV/mm
Arc resistanceASTM D495PLC 4
Compared to the anti leakage trace indexCTIUL 746PLC 4
insulation resistance--2ASTM D2571E+10ohms
insulation resistance--2JISK69151E+10ohms
insulation resistance--3JISK69151E+08ohms
Volume resistivityASTM D2571E+12ohms·cm
Volume resistivityJISK69111E+12ohms·cm
insulation resistance--3ASTM D2571E+08ohms
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
shelf-life12month
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.