Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| MeltViscosity | | ISO 11443-A | 330 Pa·s |
| density | | ISO 1183 | 1.19 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 20.0 cm³/10min |
| Shrinkage rate | | ISO 2577 | 0.50to0.70 % |
| Shrinkage rate | | ISO 2577 | 0.50to0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | 5VB |
| Burning wire flammability index | | IEC 60695-2-12 | 960 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO 180/A | 45 kJ/m² |
| Suspended wall beam without notch impact strength | | ISO 180 | NoBreak |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2/1 | 2700 MPa |
| tensile strength | | ISO 527-2/50 | 60.0 MPa |
| tensile strength | | ISO 527-2/50 | 50.0 MPa |
| Tensile strain | | ISO 527-2/50 | 4.5 % |
| Tensile strain | | ISO 527-2/50 | >50 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | 1E+16 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 110 °C |
| Heat distortion temperature | | ISO 75-2/A | 99.0 °C |
| vicat | | ISO 306/B120 | 119 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare