Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.41 g/cm³ |
| Water absorption rate | | ISO62 | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore Hardness | | DIN53505 | 81 |
| Ball Indentation Hardness | | ISO2039-1 | 150 MPa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 2800 MPa |
| Tensile stress | Yield | ISO527-2 | 67.0 MPa |
| Tensile strain | Break | ISO527-2 | 30 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 6.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | IEC60250 | 2E-03 |
| Surface Resistivity | | IEC60093 | 1E+13 ohms |
| Volume resistivity | | IEC60093 | 1E+17 ohms·cm |
| dielectric strength | | IEC60243-1 | 40 kV/mm |
| dielectric constant | | IEC60250 | 3.80 |
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ISO75-2/A | 110 °C |
| melting temperature | | ISO11357 | 165 °C |
| specific heat | | DIN52612 | 1500 J/kg/°C |
| thermal conductivity | | DIN52612 | 0.31 W/m/K |
| Service | | | -50到100 °C |
| Service | | | <140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare