PP Modified Plastics MPP-S1
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.908 g/cm³ | |
| Shrinkage rate | ASTM D955 | 1.5 % | |
| Water absorption rate | ASTM D570 | 5E-03 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 34.5 MPa |
| elongation | Yield | ASTM D638 | 10 % |
| bending strength | Yield | ASTM D790 | 48.3 MPa |
| compressive strength | ASTM D695 | 46.9 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 21 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 850 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| dielectric strength | ASTM D149 | 26 kV/mm | |
| dielectric constant | ASTM D150 | 2.25 | |
| Dissipation Factor | ASTM D150 | 2E-04 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | ASTM D648 | 118 °C | |
| ASTM D648 | 98.9 °C | ||
| ASTM D696 | 6.8E-05 cm/cm/°C | ||
| thermal conductivity | ASTMC177 | 0.12 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top