PEI ULTEM™ EX00548C BK8229
126
- Properties:Thermal stability
- Usages:Plastic bag
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.66 % | |
| Water absorption rate | ASTM D570 | 0.22 % | |
| Shrinkage rate | ASTM D955 | 0.70 % | |
| ASTM D955 | 0.70 % | ||
| ISO 294-4 | 0.70 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 3030 Mpa | |
| ISO 527-2/1 | 3200 Mpa | ||
| tensile strength | ASTM D638 | 85.4 Mpa | |
| ISO 527-2 | 86.0 Mpa | ||
| ASTM D638 | 83.7 Mpa | ||
| ISO 527-2 | 85.0 Mpa | ||
| elongation | ASTM D638 | 6.1 % | |
| Tensile strain | ISO 527-2 | 6.0 % | |
| elongation | ASTM D638 | 8.1 % | |
| Tensile strain | ISO 527-2 | 7.6 % | |
| Flexural modulus | ASTM D790 | 3450 Mpa | |
| ISO 178 | 3390 Mpa | ||
| bending strength | ASTM D790 | 149 Mpa | |
| ISO 178 | 143 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 4.90 J | |
| Impact strength of cantilever beam gap | ISO 180/1A | 4.7 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 33 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 185 °C | |
| ISO 75-2/Af | 184 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top