POM/GF/PTFE LNP™ LUBRICOMP™ KFL4016NC SABIC INNOVATIVE US
50
- Properties:High temperature resistanUV resistance
- Usages:Castershousehold electrical appliances
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.4 % | |
| ASTM D955 | 1.6 % | ||
| ISO 294-4 | 1.3 % | ||
| ISO 294-4 | 1.5 % | ||
| Water absorption rate | ASTM D570 | 0.16 % | |
| ISO 62 | 0.29 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 6130 Mpa | |
| ISO 527-2/1 | 5800 Mpa | ||
| tensile strength | ASTM D638 | 56.0 Mpa | |
| ISO 527-2 | 49.0 Mpa | ||
| ASTM D638 | 56.0 Mpa | ||
| ISO 527-2 | 46.0 Mpa | ||
| elongation | ASTM D638 | 3.6 % | |
| ISO 527-2 | 2.3 % | ||
| ASTM D638 | 2.6 % | ||
| ISO 527-2 | 4.0 % | ||
| Flexural modulus | ASTM D790 | 5300 Mpa | |
| ISO 178 | 6300 Mpa | ||
| bending strength | ASTM D790 | 92.0 Mpa | |
| coefficient of friction | ASTM D3702 | 0.50 | |
| ASTM D3702 | 0.43 | ||
| Wear factor | ASTM D3702 | 1.9E+8 10^-8 mm³/N·m |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D4812 | 210 J/m | |
| ISO 180/1U | 17 kJ/m² | ||
| Dart impact | ASTM D3763 | 9.00 J | |
| ISO 6603-2 | 2.00 J |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 80 °C | ||
| drying time | 4.0 hr | ||
| Temperature at the rear of the barrel | 175 to 190 °C | ||
| Temperature in the middle of the barrel | 195 to 205 °C | ||
| Temperature at the front of the material cylinder | 210 to 220 °C | ||
| Processing (melt) temperature | 200 to 215 °C | ||
| Temperature | 80 to 110 °C | ||
| Back pressure | 0.200 to 0.300 Mpa | ||
| screw speed | 30 to 60 rpm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 161 °C | |
| ASTM D648 | 132 °C | ||
| ISO 75-2/Af | 147 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top