AS(SAN) 81HF LG YX NINGBO

Form：Granules | Grade：Injection grade

Properties:

High mobilityHigh liquidity

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

High mobility | High liquidity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃/5kg	ASTM D-1238	6.2	g/10min
melt mass-flow rate	melt mass-flow rate	220℃/10kg	ASTM D-1238	60.0	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	63.5×12.7×3.2mm,1/8"	ASTM D-256	2.0(19.6)(0.36)	kg.cm/cm(J/m)(Ft*Ib/in)
Rockwell hardness		ASTM D-785	122	R标尺
tensile strength		ASTM D-638	700(69)(10000)	kg/cm
elongation		ASTM D-638	6	%
bending strength		ASTM D-790	1130(111)(16200)	kg/cm
Bending modulus		ASTM D-790	37500(3680)(536300)	kg/cm
Impact strength of cantilever beam gap	63.5×12.7×6.4mm,1/4"	ASTM D-256	1.5(14.7)(0.27)	kg.cm/cm(J/m)(Ft*Ib/in)
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility	1/16"	UL 94	HB	mm/min
Combustibility	Combustibility	1/8"	IEC 707	FH3-25	mm/min
Hot deformation temperature	18.5kg/cm	ASTM D-648	88	°C
Vicat softening temperature	1000g	ASTM D-1525	105	°C
Combustibility	1/8"	UL 94	HB	mm/min
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Contractility		ASTM D-955	0.2-0.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Hot wire ignition		UL 746A	PLC 5
High arc combustion index		UL 746A	PLC 0
High voltage arc tracing rate		UL 746A	PLC 0
Arc resistance		ASTM D-495	PLC_5
Compared to the anti leakage trace index		UL 746A	PLC 5

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top