Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| viscosity number | | ISO 307 | 145 cm³/g |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 174 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | ISO 3795 | <100 mm/min |
| UL flame retardant rating | | IEC 60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC 60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC 60695-11-10,-20 | HB |
| Burning wire flammability index | | IEC 60695-2-12 | -- °C |
| Burning wire flammability index | | IEC 60695-2-12 | -- °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2/1A/1 | 5800 Mpa |
| tensile strength | | ISO 527-2/1A/5 | 120 Mpa |
| Tensile strain | | ISO 527-2/1A/5 | 3.5 % |
| Flexural modulus | | ISO 178 | 4300 Mpa |
| bending strength | | ISO 178 | 170 Mpa |
| Bending Strain | | ISO 178 | 6.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 40 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 45 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/Bf | 210 °C |
| Heat distortion temperature | | ISO 75-2/Af | 200 °C |
| vicat | | ISO 306/A50 | 215 °C |
| vicat | | ISO 306/B50 | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices