PP 4204 FPC NINGBO

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceHigh mobilityHigh impact strengthExcellent low-temperatureComplies with FDA 21 CFR High liquidity

Typical Applications:

BumperBumperWear resistant accessoriesLoad containerPallet

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Bumper \| Bumper \| Wear resistant accessories \| Load container \| Pallet
Properties:	High impact resistance \| High mobility \| High impact strength \| Excellent low-temperature \| Complies with FDA 21 CFR \| High liquidity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.9	g/cm³
Shrinkage rate		FPC Method	1.3-1.7	%
melt mass-flow rate		ISO 1133	19	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ISO 180	40	kg.cm/cm
Bending modulus		ISO 178	834	Mpa
Rockwell hardness		ISO 2039	92	R
Impact strength of cantilever beam gap	-20℃	ISO 180	10	kg.cm/cm
Elongation at Break		ISO 527	550	%
tensile strength	Yield	ISO 527	21	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306	135	°C
Hot deformation temperature	HDT	ISO 75	100	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top