PA66 AG-30/10 EMS-CHEMIE JAPAN

Form：Granules | Grade：Wear resistant grade

Properties:

High hardnessHigh temperature resistanFiller: Glass fiber reinf30%Filler by weight

Typical Applications:

Industrial machineryHousehold daily necessitiesPower/Other ToolsIndustrial applicationsEngineering accessoriesApplication in the automotive fieldElectrical/Electronic ApplicationsConsumer product application fieldHome appliance componentssporting goods

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial machinery \| Household daily necessities \| Power/Other Tools \| Industrial applications \| Engineering accessories \| Application in the automotive field \| Electrical/Electronic Applications \| Consumer product application field \| Home appliance components \| sporting goods
Properties:	High hardness \| High temperature resistan \| Filler: Glass fiber reinf \| 30% \| Filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	kJ/m²	30
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	kJ/m²	40
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		MPa	6500	3000
tensile strength	Break	MPa	100	70.0
Tensile strain	Break	%	4.0	8.0
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	°C	190	--
Hot deformation temperature	Hot deformation temperature	8.0MPa,Unannealed	°C	70.0	--
Continuous use temperature	--2	°C	90.0to110	--
Continuous use temperature	Continuous use temperature	--3	°C	180	--
Melting temperature		°C	260	--
Linear coefficient of thermal expansion	MD	cm/cm/°C	3E-05	--
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	cm/cm/°C	1E-04	--
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD	%	0.80	--
Shrinkage rate	Shrinkage rate	MD	%	0.40	--
Water absorption rate	Saturation,23°C	%	5.0	--
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	%	2.0	--

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top