Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.70to1.85 g/cm³ |
| Shrinkage rate | | | 0.15to0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 110 MPa |
| Poisson's ratio | | | 0.30 |
| Tensile modulus | | ASTM D638 | 12000 MPa |
| tensile strength | | ASTM D638 | 38.0 MPa |
| Flexural modulus | | ASTM D790 | 10000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 430 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 530 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 15 kV/mm |
| arc resistance | | ASTM D495 | 180 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Imp | | UL 746 | 130 °C |
| RTI Str | | UL 746 | 130 °C |
| Linear coefficient of thermal expansion | | | 2.5E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | | 3.5E-05 cm/cm/°C |
| thermal conductivity | | | 0.30 W/m/K |
| RTI Elec | | UL 746 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare