POE 5171 EXXONMOBIL SINGAPORE

Form：Granules

Properties:

High toughnessLow temperature impact re

Typical Applications:

Blown filmcast film FootwearFoamsole

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Blown film \| cast film \| Footwear \| Foam \| sole
Properties:	High toughness \| Low temperature impact re

Certificates

TDS

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
tensile strength	@100% Elongation	ASTM D-412	290（2）	Psi(MPa)
tensile strength	tensile strength	@300% Elongation	ASTM D-412	390（3）	Psi(MPa)
Mooney viscosity ML (1+4)	125℃	ASTM D-1646	22	Torgue Units
tensile strength		ASTM D-624	223（40）	lb/in(kN/m)
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ExxonMobil Method	1.0	g/10 min
density		ExxonMobil Method	0.870	g/cm³
turbidity		ASTM D-1003	8@50mil	%
Shore hardness	Shore A,15 sec	ASTM D-2240	70
melt mass-flow rate		ExxonMobil Method	1.7	g/10 min
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Maximum melt temperature		ExxonMobil Method	131（55）	℉(℃)
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break	@Break	ASTM D-638	>2000(No Break)	%
tensile strength	@Break	ASTM D-638	>1200(>8)	Psi(MPa)
Bending modulus	1% secant	ASTM D-790	1920（13）	Psi(MPa)

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top