PEI ULTEM™ 2310
470
- Properties:Thermal stabilityenhanceLong fiber reinforcement
- Usages:Automotive ApplicationsFitness equipment
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.51 | |
| Shrinkage rate | ASTM D-955 | 2-4 in/inE-3 | |
| ASTM D-955 | 2-4 in/inE-3 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 7.1 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 24500 psi | |
| ASTM D-638 | 24500 psi | ||
| Izod reverse gap impact value | ASTM D-256 | 7.5 ft-lb/in | |
| Impact strength of cantilever beam gap | ASTM D-256 | 1.6 ft-lb/in | |
| elongation at break | ASTM D-638 | 2.0 % | |
| Flexural modulus | ASTM D-790 | 1300000 psi | |
| Tensile modulus | ASTM D-638 | 1260000 psi | |
| bending strength | ASTM D-790 | 33000 psi |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM E-831 | 0 in/in℉ | |
| ASTM E-831 | 2×10 in/in℉ | ||
| Heat index | UL 746B | 180 deg℃ | |
| UL 746B | 170 deg℃ | ||
| UL 746B | 180 deg℃ | ||
| Heat distortion temperature | ASTM D-648 | 410 deg℉ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top