PEEK 330G JILIN JOINATURE

Form：Granules | Grade：Injection grade

Properties:

High mobility

Typical Applications:

Automotive sectorAerospace

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Aerospace
Properties:	High mobility

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ISO 180/A	5	kJ/m²
Charpy Notched Impact Strength		ISO 179-1eA	4	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	23℃	ISO 868	85	D 级
compressive strength	23℃	ISO 604	130	Mpa
Tensile strain	Break，23℃	ISO 527	25	%
Bending modulus	23℃	ISO 178	4300	Mpa
bending strength	Yield，23℃	ISO 178	175	Mpa
tensile strength	Yield，23℃	ISO 527	110	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity	23℃	ISO 22007-4	0.29	W/m/K
Melting temperature	Tg（起始）	ISO 11357	143	°C
specific heat	23℃	DSC	2.2	kJ/kg /℃
Linear coefficient of thermal expansion	低于Tg沿着Flow	ISO 11359	50	ppm/K
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	高于Tg沿着Flow	ISO 11359	120	ppm/K
Hot deformation temperature	1.8 Mpa	ISO 75-f	156	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃，24hr，3.2 mm厚拉伸棒	ISO 62-1	0.07	%
Water absorption rate	Water absorption rate	Equilibrium，23℃	ISO 62-1	0.4	%
Shrinkage rate	MD	ISO 294-4	1.3	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	1	%
melt mass-flow rate	380℃，5.0kg	ISO 1133	80	g/10min
density	结晶	ISO 1183	1.3	g/cm³
density	density	非结晶	ISO 1183	1.26	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	23℃，1 MHz	IEC 60250	0.004
Dielectric constant	23 ℃, 1 kHz	IEC 60250	3.2
Compared to the anti leakage trace index		IEC 60112	PLC 4
Dielectric strength	2 mm	IEC 60243-1	23	KV/mm
Volume resistivity	275 ℃	IEC 60093	10^9	ohms·cm
Volume resistivity	Volume resistivity	23 ℃，1V	IEC 60093	10^16	ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top