PA66 S223-6G-FC DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh rigidity

Typical Applications:

Electrical applicationshousehold electrical appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| household electrical appliances
Properties:	Glass fiber reinforced \| High rigidity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	9.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	10	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	65	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	81	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
Flammability level	Flammability level		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	9950	Mpa
tensile strength	Break	ISO 527-2	200	Mpa
Tensile strain	Break	ISO 527-2	3.6	%
Bending modulus		ISO 178	8400	Mpa
bending strength		ISO 178	250	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	260	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	250	°C
Melting temperature		ISO 11357-3	260	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	7.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.36	g/cm³
Shrinkage rate	横向Flow	ISO 294-4	1.0	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.20	%
Water absorption rate	Saturation, 23°C	ISO 62	6.0	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	1.0E+14	ohms·cm
Dielectric strength		IEC 60243-1	30	KV/mm
Relative permittivity	100 Hz	IEC 60250	3.80
Relative permittivity	Relative permittivity	1 MHz	IEC 60250	3.50
Dissipation factor	100 Hz	IEC 60250	9.0E-3
Dissipation factor	Dissipation factor	1 MHz	IEC 60250	0.016
Compared to the anti leakage trace index		IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top