PA66 DENYL 66 1510
0
- Properties:Fillerglass fiber reinforced material15%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.80 % | |
| ASTM D955 | 1.2 % | ||
| density | ASTM D792 | 1.23 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 5500 MPa | |
| tensile strength | Yield | ASTM D638 | 110 MPa |
| elongation | Break | ASTM D638 | 3.0 % |
| Flexural modulus | ASTM D790 | 5000 MPa | |
| bending strength | ASTM D790 | 180 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 5.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 30 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648A | 245 °C | |
| vicat | ASTM D15252 | 250 °C | |
| RTI Elec | UL 746 | 140 °C | |
| RTI Imp | UL 746 | 140 °C | |
| RTI | UL 746 | 140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top