
PBT 553-1001 SABIC INNOVATIVE JAPAN
140
Form:Granules | Grade:Injection grade
Properties:
Low warpageGlass fiber reinforced
Typical Applications:
Automotive External PartsConstruction fieldOutdoor applicationsElectrical appliancesPlastic bagAutomotive interior partsCasters
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Automotive External Parts | Construction field | Outdoor applications | Electrical appliances | Plastic bag | Automotive interior parts | Casters |
| Properties: | Low warpage | Glass fiber reinforced |
Certificates

Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 37 | % | |
| UL flame retardant rating | 2.3mm | UL 94 | 5VA | |
| 0.9mm | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | Break,50.0mmSpan | ASTM D790 | 179 | Mpa |
| Bending modulus | 50.0mmSpan | ASTM D790 | 9400 | Mpa |
| tensile strength | Break | ASTM D638 | 110 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:60to138°C | ASTME831 | 2.2E-05 | cm/cm/°C |
| MD:-40to40°C | ASTME831 | 2.2E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 160 | °C |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 204 | °C | |
| RTI Elec | UL 746 | 125 | °C | |
| RTI Imp | UL 746 | 110 | °C | |
| RTI Str | UL 746 | 125 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD:--4 | Internal Method | 0.60-0.90 | % |
| TD:--3 | Internal Method | 0.40-0.60 | % | |
| MD:--3 | Internal Method | 0.30-0.50 | % | |
| MD:--2 | Internal Method | 0.50-0.80 | % | |
| Specific volume | ASTM D792 | 0.640 | cm³/g | |
| Outdoor applicability | UL 746C | f1 | ||
| Water absorption rate | 24hr | ASTM D570 | 0.070 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot wire ignition | HWI | UL 746 | PLC 1 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 | |
| High arc combustion index | HAI | UL 746 | PLC 3 | |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 | |
| Arc resistance | ASTM D495 | PLC6 | ||
| Dissipation factor | 1MHz | ASTM D150 | 0.020 | |
| 100Hz | ASTM D150 | 2E-03 | ||
| Volume resistivity | ASTM D257 | 4.3E+16 | ohms·cm | |
| Dielectric strength | 1.60mm,in Oil | ASTM D149 | 26 | KV/mm |
| 3.20mm,inAir | ASTM D149 | 19 | KV/mm | |
| Dielectric constant | 100Hz | ASTM D150 | 3.80 | |
| 1MHz | ASTM D150 | 3.70 | ||
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 118 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.