PSU

PSU UDEL® P-1700 BK937 SOLVAY USA

Properties:
dimensional stability Electron beam disinfectioRadiopableRadiation disinfectionPressure cooker disinfectGood disinfection performEthylene oxide disinfectiAnti gamma radiationChemical resistanceAlkali resistantAlcohol resistanceheat-resistingAcid resistanceResistance to hydrocarbonDetergent resistantSteam resistantThermal disinfectionHigh toughnessBiocompatibilityFood contact complianceHydrolysis resistanceDisinfect with steamExcellent appearance
Usages:
Electrical fieldElectronic fieldElectrical componentsElectrical appliancesvalveValve componentsIndustrial componentsPipeline componentsPipeline componentsHome appliance componentsAutomotive sectorFood service sectorSurgical instrumentsMicrowave cookerDental application fieldMedical suppliesNursing suppliesMedical devicesMedical devices
Certificates:
UL
Compare View Prices

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	69 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D1822	420 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	4.5mm	UL 94	V-0
Burning wire flammability index	0.8mm	IEC 60695-2-12	850 °C
Burning wire flammability index	Burning wire flammability index	1.6to6.0mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	0.8mm	IEC 60695-2-13	875 °C
Hot filament ignition temperature	Hot filament ignition temperature	1.6to6.0mm	IEC 60695-2-13	850 °C

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	2480 Mpa
tensile strength		ASTM D638	70.3 Mpa
elongation	Break	ASTM D638	50to100 %
Bending modulus		ASTM D790	2690 Mpa
bending strength		ASTM D790	106 Mpa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	174 °C
Linear coefficient of thermal expansion	MD	ASTM D696	5.6E-05 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	1.24 g/cm³
melt mass-flow rate	343°C/2.16kg	ASTM D1238	6.5 g/10min
Shrinkage rate	MD	ASTM D955	0.70 %
Water absorption rate	24hr	ASTM D570	0.30 %

Electrical performance	Test Condition	Test Method	Test Result
Dissipation factor	1MHz	ASTM D150	6E-03
Volume resistivity		ASTM D257	3E+16 ohms·cm
Dielectric strength		ASTM D149	17 KV/mm
Dielectric constant	60Hz	ASTM D150	3.03
	Dielectric constant	1kHz	ASTM D150	3.04
	Dielectric constant	Dielectric constant	1MHz	ASTM D150	3.02
Dissipation factor	60Hz	ASTM D150	7E-04
Dissipation factor	Dissipation factor	1kHz	ASTM D150	1E-03

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PSU UDEL® P-1700 BK937 SOLVAY USA

Technical Data Sheet

You May Like