Unspecified SLOVALEN® PH 69 GF 30 TS PLASTCOM SLOVAKIA

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179	8.0	kJ/m²
Impact strength of simply supported beam without notch	-20°C	ISO 179	41	kJ/m²
Charpy Notched Impact Strength	-20°C	ISO 179	6.0	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	43	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	6400	MPa
tensile strength	Yield	ISO 527-2	77.0	MPa
Tensile strain	Yield	ISO 527-2	3.0	%
Bending modulus		ISO 178	5100	MPa
bending strength		ISO 178	117	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	160	°C
Vicat softening temperature		ISO 306/B	163	°C
Melting temperature		ISO 3146	160	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	STM640808	0.78	%
density		ISO 1183	1.10	g/cm³
melt mass-flow rate	230°C/2.16kg	ISO 1133	8.0	g/10min
Shrinkage rate	TD	STM640808	1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top