LDPE POLYMER-E F2200
98
- Properties:High transparency
- Usages:filmPipe fittings
Compare
View PricesTechnical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| turbidity | ASTM D-1003 | 4.6 % | |
| gloss | ASTM D-2457 | 120 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.922 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| impact strength | ASTM D-1709 | 90 g.50%F | |
| 1% elongation elasticity coefficient (film) | ASTM D-882 | 1970 kg/cm2 | |
| ASTM D-882 | 2250 kg/cm2 | ||
| Tensile strength at fracture point (thin film) | ASTM D-882 | 250 kg/cm2 | |
| ASTM D-882 | 160 kg/cm2 | ||
| Elongation (film) | ASTM D-882 | 320 % | |
| ASTM D-882 | 540 % | ||
| Tear | ASTM D-1922 | 110 kg/cm | |
| ASTM D-1922 | 72 kg/cm | ||
| ASTM D-1894 | <0.77 | ||
| hardness | ASTM D-2240 | 52 |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 2.3 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Low temperature brittle fracture temperature | ASTM D-746 | <-70 °C | |
| Vickers softening point | ASTM D-1525 | 96 °C | |
| ASTM D-648 | 48 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top