PC EXL1414 VT5E309 SABIC INNOVATIVE US

Form：Granules | Grade：Injection grade

Properties:

ProcessabilityModerate liquidityDuctilitycopolymerGood demolding performanc

Typical Applications:

Bottle capHome appliance componentsElectrical applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Bottle cap \| Home appliance components \| Electrical applications
Properties:	Processability \| Moderate liquidity \| Ductility \| copolymer \| Good demolding performanc

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	23°C	ISO 179/1eA	70	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	65	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
Dart impact	23°C, Total Energy	ASTM D3763	70.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.40 mm	UL 94	HB
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	875	°C
Burning wire flammability index	0.8 mm	IEC 60695-2-12	850	°C
Burning wire flammability index	Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	875	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	Yield, 50.0 mm Span4	ASTM D790	92.0	Mpa
bending strength	bending strength	--5,6	ISO 178	85.0	Mpa
elongation	Break3	ASTM D638	98	%
	elongation	Yield	ISO 527-2/50	6.0	%
	elongation	elongation	Yield3	ASTM D638	6.0	%
tensile strength	Break	ISO 527-2/50	60.0	Mpa
	tensile strength	Break3	ASTM D638	50.0	Mpa
		tensile strength	Yield	ISO 527-2/50	57.0	Mpa
		tensile strength	tensile strength	Yield3	ASTM D638	55.0	Mpa
Tensile modulus	--	ISO 527-2/1	2150	Mpa
Tensile modulus	Tensile modulus	--2	ASTM D638	2020	Mpa
Bending modulus	--5	ISO 178	2250	Mpa
Bending modulus	Bending modulus	50.0 mm Span4	ASTM D790	2230	Mpa
elongation	Break	ISO 527-2/50	120	%
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			120	°C
drying time			3.0 to 4.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			215 to 295	°C
Temperature in the middle of the barrel			280 to 305	°C
Temperature at the front of the material cylinder			295 to 315	°C
Spray nozzle temperature			290 to 310	°C
Processing (melt) temperature			295 to 315	°C
Mold temperature			70 to 95	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			40 to 70	rpm
Exhaust hole depth			0.025 to 0.076	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Be	140	°C
	Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	124	°C
		Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	139	°C
		Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Ae	128	°C
Vicat softening temperature	--	ASTM D152510	145	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	146	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	7.0E-5	cm/cm/°C
RTI Imp		UL 746	120	°C
RTI		UL 746	125	°C
Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.2E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	7.5E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	7.2E-5	cm/cm/°C
RTI Elec		UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.15	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	0.35	%
Shrinkage rate	Across FlowFlow : 3.20 mm	Internal Method	0.40 - 0.80	%
Shrinkage rate	Shrinkage rate	Flow : 3.20 mm	Internal Method	0.40 - 0.80	%
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	9.00	cm3/10min
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	10	g/10 min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1 MHz	ASTM D150	2.64
Dissipation factor	100 Hz	ASTM D150	1.2E-3
Dissipation factor	Dissipation factor	1 MHz	ASTM D150	9.3E-3
Surface resistivity		ASTM D257	> 1.0E+15	ohms
Volume resistivity		ASTM D257	> 1.0E+15	ohms·cm
Dielectric strength	0.800 mm, in Oil	ASTM D149	16	KV/mm
Dielectric constant	100 Hz	ASTM D150	2.68
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	121
Rockwell hardness	Rockwell hardness	L -Sale	ASTM D785	89

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top