
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | ASTM D1003 | <1.0 | % | |
| transmissivity | ASTM D1003 | 90.0 | % | |
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 130 | kJ/m² |
| 23°C | ASTM D256 | NoBreak | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 3.0mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield | ASTM D638 | 45.0 | Mpa |
| Yield | ISO 527-2/50 | 45.0 | Mpa | |
| bending strength | ISO 178 | 67.0 | Mpa | |
| ASTM D790 | 67.0 | Mpa | ||
| Bending modulus | ISO 178 | 1800 | Mpa | |
| ASTM D790 | 1800 | Mpa | ||
| Tensile strain | Break | ISO 527-2/50 | 340 | % |
| elongation | Break | ASTM D638 | 340 | % |
| Tensile strain | Yield | ISO 527-2/50 | 5.0 | % |
| elongation | Yield | ASTM D638 | 5.0 | % |
| tensile strength | Break | ISO 527-2/50 | 53.0 | Mpa |
| Break | ASTM D638 | 53.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 62.0 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 70.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 24hr | ASTM D570 | 0.13 | % |
| Shrinkage rate | MD | ASTM D955 | 0.20-0.50 | % |
| density | ASTM D792 | 1.23 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 105 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.