MVLDPE ELITE™ 5110G DOW THAILAND
31
- Properties:transparentHigh toughnessHigh impact resistance
- Usages:film
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTMD1238 | 0.85 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTMD2457 | 60 | |
| Haze ratio | ASTMD1003 | 13 % |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Film thickness - tested | 51 µm | ||
| 内部方法 | 6.91 J | ||
| 内部方法 | 97.0 N | ||
| Secant modulus | ASTMD882 | 277 Mpa | |
| ASTMD882 | 330 Mpa | ||
| tensile strength | ASTMD882 | 13.9 Mpa | |
| ASTMD882 | 14.6 Mpa | ||
| ASTMD882 | 57.5 Mpa | ||
| ASTMD882 | 51.9 Mpa | ||
| elongation | ASTMD882 | 600 % | |
| ASTMD882 | 660 % | ||
| Falling hammer impact | ASTMD1709B | 410 g | |
| Elmondov tear strength | ASTMD1922 | 560 g | |
| ASTMD1922 | 1100 g | ||
| Initial sealing temperature 2 | 内部方法 | 120 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTMD1525 | 111 °C | |
| 内部方法 | 123 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top