NBR NANCAR® 3645 Nantex Industry Co., Ltd.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	300%Strain3	ASTM D412	10.0	MPa
Permanent compression deformation	100°C,70hr	ASTM D395	55	%
tear strength		ASTM D624	62.0	kN/m
elongation	Break5	ASTM D412	550	%
	elongation	Break4	ASTM D412	570	%
	elongation	elongation	Break3	ASTM D412	630	%
tensile strength	Yield5	ASTM D412	25.8	MPa
	tensile strength	Yield4	ASTM D412	26.3	MPa
		tensile strength	Yield3	ASTM D412	26.5	MPa
			tensile strength	300%Strain5	ASTM D412	12.2	MPa
			tensile strength	tensile strength	300%Strain4	ASTM D412	11.7	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Heat loss		ASTM D5688	0.20	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Soluble inMEK			100	%
stabilizer			Non-staining
bound acrylonitrile content		Internal Method	36.0	%
Mooney viscosity	ML1+4,100°C2	ASTM D1646	74	MU
Mooney viscosity	Mooney viscosity	ML1+4,100°C	ASTM D1646	45	MU
density			0.980	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,5Sec4	ASTM D2240	76
	Shore hardness	ShoreA,5Sec5	ASTM D2240	77
	Shore hardness	Shore hardness	ShoreA,5Sec3	ASTM D2240	75
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of tensile strength in air	100°C,70hr	ASTM D573	1.0	%
Volume change	100°C,70hr,在IRM903油中	ASTM D471	12	%
Volume change	Volume change	100°C,70hr,ASTM标准油（1号）	ASTM D471	-0.20	%
Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在IRM903油中	ASTM D471	-8.0
Change rate of hardness (Shore) in the air	Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在ASTM#1油中	ASTM D471	1.0
Change rate of ultimate elongation in air	100°C,70hr,在IRM903油中	ASTM D471	-30	%
Change rate of ultimate elongation in air	Change rate of ultimate elongation in air	100°C,70hr	ASTM D573	-25	%
Change rate of hardness (Shore) in the air	ShoreA,100°C,70hr	ASTM D573	3.0
Change rate of tensile strength in air	100°C,70hr,在ASTM#1油中	ASTM D471	1.0	%
Change rate of tensile strength in air	Change rate of tensile strength in air	100°C,70hr,在IRM903油中	ASTM D471	-23	%
Change rate of ultimate elongation in air	100°C,70hr,在ASTM#1油中	ASTM D471	-22	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top