POM 30-A（M90） SHANDONG GUANKUANG

225

Form：Granules

Properties:

wear resistantGood elasticityHigh stiffnessFatigue resistanceCreep resistanceHigh impact resistanceUV resistanceNoise reduction levelHigh mobilityDemolding stageConductive

Typical Applications:

Thin walled productsPrecision instrumentsIndustrial machineryPump partsVehicle electronicspartsEngine partsbearingwheelAutomotive External PartsThin walled componentsValves/valve componentsParts under the hood of a car

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Thin walled products \| Precision instruments \| Industrial machinery \| Pump parts \| Vehicle electronics \| parts \| Engine parts \| bearing \| wheel \| Automotive External Parts \| Thin walled components \| Valves/valve components \| Parts under the hood of a car
Properties:	wear resistant \| Good elasticity \| High stiffness \| Fatigue resistance \| Creep resistance \| High impact resistance \| UV resistance \| Noise reduction level \| High mobility \| Demolding stage \| Conductive

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ISO 179/1eA	6.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2600	Mpa
bending strength		ISO 178	90.0	Mpa
Bending modulus		ISO 178	2600	Mpa
Tensile strain	Break	ISO 527-2	35	%
tensile strength	Yield	ISO 527-2	61.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	95.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.30	%
melt mass-flow rate	190°C/2.16kg	ISO 1133	9.0	g/10min
density		ISO 1183	1.41	g/cm³

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top