
ABS GF15 AS USA TPC
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | Yield | ASTM D-638 | 45.5 | MPa |
| Elongation at Break | ASTM D-638 | 3.5 | % | |
| Bending modulus | ASTM D-790 | 4140 | MPa | |
| bending strength | ASTM D-790 | 67.6 | MPa | |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 64.1 | J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D-256 | 347 | J/m |
| Rockwell hardness | ASTM D-785 | 107 | R-Scale | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.50mm | UL 94 | HB | |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D-648 | 108 | ℃ |
| 1.80MPa,Unannealed | ASTM D-648 | 96.1 | ℃ | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000034 | cm/cm/℃ |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 1.16 | g/cm3 | |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.30 | % |
| Water absorption rate | 24hr | ASTM D-570 | 0.18 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D-257 | 1.0E+10 to 1.0E+12 | ohm.cm | |
| Dielectric strength | ASTM D-149 | 18 | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.