
PA12 LV-30H FWA BLACK9225 EMS-CHEMIE SWITZERLAND
129
Form:Granules | Grade:Injection grade
Properties:
Filler: Glass fiber reinf30%Filler by weight
Typical Applications:
Lighting applicationsLaptop caseConsumer product application fieldVehicle electronicsElectrical/Electronic ApplicationsApplication in the automotive fieldElectrical appliancesIndustrial applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Lighting applications | Laptop case | Consumer product application field | Vehicle electronics | Electrical/Electronic Applications | Application in the automotive field | Electrical appliances | Industrial applications |
| Properties: | Filler: Glass fiber reinf | 30% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | kJ/m² | 35 | |
| -30°C | kJ/m² | 35 | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Flammability level | 0.40mm | V-0 | -- | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | MPa | 10000 | 9000 | |
| tensile strength | Break | MPa | 95.0 | 75.0 |
| Tensile strain | Break | % | 2.5 | 2.5 |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 160 | -- |
| 8.0MPa,Unannealed | °C | 105 | -- | |
| Continuous use temperature | °C | 90.0to120 | -- | |
| Melting temperature | °C | 178 | -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 2E-05 | -- |
| TD | cm/cm/°C | 9E-05 | -- | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD | % | 0.70 | -- |
| MD | % | 0.10 | -- | |
| Water absorption rate | Saturation,23°C | % | 1.4 | -- |
| Equilibrium,23°C,50%RH | % | 0.60 | -- | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ohms | -- | ||
| Volume resistivity | ohms·cm | 1E+11 | ||
| Dielectric strength | kV/mm | 44 | 43 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | MPa | 170 | 145 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.