Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 16 hr |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 2.23 g/cm³ |
| Specific volume | | | 0.448 cm³/g |
| Shrinkage rate | | ASTMD2566 | 0.060 % |
| Solid content by volume | | | 100 % |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 按容量计算的混合比:2.5按重量计算的混合比:2.5 |
| | | 按容量计算的混合比:1.0按重量计算的混合比:1.0 |
| | | 30 min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 85 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| TemperatureResistance | | | 149 °C |
| TemperatureResistance | | | 60 °C |
| TensileShearAdhesion | | ASTMD1002 | 17.7 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | | 29.1 MPa |
| bending strength | | ASTMD790 | 42.4 MPa |
| compressive strength | | ASTMD695 | 50.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTMD150 | 46.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 6.1E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare