
PBT ESTOPLAST EP 1500 Ester Industries Ltd.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 65 | J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 无断裂 | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.50mm | UL 94 | HB | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ASTM D638 | 2700 | MPa | |
| tensile strength | ASTM D638 | 56.0 | MPa | |
| bending strength | ASTM D790 | 83.0 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 170 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 65.0 | °C | |
| Melting temperature | ISO 11357-3 | 224 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.30 | g/cm³ | |
| Shrinkage rate | MD | ASTM D570 | 2.0 | % |
| TD | ASTM D570 | 2.0 | % | |
| Water absorption rate | Saturation | DIN 53495/1L | 0.45 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Dielectric strength | IEC 60243-1 | 27 | kV/mm | |
| Compared to the anti leakage trace index | IEC 60112 | PLC 0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.