Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D1505 | 1.30 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 3.0 g/10min |
| Carbon black content | | ASTM D1603 | 2.6 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Light absorption coefficient | | ASTM D3349 | >350 Abs/mm |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTM D2863 | >30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 12.7 MPa |
| elongation | Break | ASTM D638 | 650 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Oven aging | | | 2.0 day |
| Change rate of tensile strength in air | | ASTM D638 | >90 % |
| Elongation retention rate | | ASTM D638 | >90 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTM D150 | 3.10 |
| Dissipation Factor | | ASTM D150 | 1E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTM D746 | -30.0 °C |
| melting temperature | | DSC | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare