PBT 4130F-104B ZHANGZHOU CHANGCHUN

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedFlame retardant

Typical Applications:

Fiber grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fiber grade
Properties:	Glass fiber reinforced \| Flame retardant

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	10	kg-cm/cm
Bending modulus		ASTM D790	90000	kg/m²
bending strength		ASTM D790	2020	kg/m²
elongation		ASTM D638	3.4	%
tensile strength		ASTM D638	1295	kg/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Network melting temperature	DSC	内部测试方法	225	°C
Hot deformation temperature	0.45MPa	ASTM D648	210	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa	ASTM D648	200	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
ash content		内部测试方法	30	%
Hygroscopicity	24hr	ASTM D570	0.03	%
density	吸湿率，24hr 灰分	ASTM D792	1.65	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	90	S
Dissipation factor	60Hz	ASTM D150	20
Dielectric constant	60Hz	ASTM D150	3.5
Insulation cohesion	2.0mm	ASTM D149	20	KC/mm
Surface resistivity		ASTM D257	10000000000000	Ω
Volume resistivity		ASTM D257	1000000000000000	Ω.cm
Linear coefficient of thermal expansion		ASTM D696	3000000000000000	cm/cm/℃
hardness	Test Condition	Test Method	Test Result	Test Unit
Hardness (Rockwell R)		ASTM D785	121
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0mm	UL 94	V-0 5VA
	UL flame retardant rating	1.5mm	UL 94	V-0 5VA
	UL flame retardant rating	UL flame retardant rating	0.74mm	UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top