
PC EFT3200 MITSUBISHI ENGINEERING JAPAN
100
Form:Granules | Grade:Injection grade
Properties:
Flame retardanttransparent
Typical Applications:
Electronic and electrical componentsFitness equipment
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components | Fitness equipment |
| Properties: | Flame retardant | transparent |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790/ISO 178 | 93.0 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2400 | kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 62.0 | kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2400 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 100 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000066 | mm/mm.℃ | |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 136 | ℃(℉) |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570/ISO 62 | 0.24 | % | |
| Shrinkage rate | ASTM D955 | 0.50-0.70 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257/IEC 60093 | 3.0E+16 | Ω.cm | |
| Surface resistivity | ASTM D257/IEC 60093 | 6.0E+15 | Ω |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.