PA66 A 216 SOLVAY KOREA

Form：Granules | Grade：Injection grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	NoBreak
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-2
UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	V-2
Burning wire flammability index	0.8mm	IEC 60695-2-12	650	°C
Ignition temperature of heating wire	1.6mm	IEC 60695-2-13	650	°C
Extreme Oxygen Index		ISO 4589-2	26	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/1A	3200	Mpa
tensile strength	Yield,23°C	ASTM D638	85.0	Mpa
	tensile strength	Yield,23°C	ISO 527-2/1A	85.0	Mpa
	tensile strength	tensile strength	Break,23°C	ISO 527-2/1A	55.0	Mpa
Tensile strain	Yield,23°C	ISO 527-2	4.5	%
elongation	Break,23°C	ASTM D638	30	%
Tensile strain	Break,23°C	ISO 527-2	>30	%
Bending modulus	23°C	ASTM D790	3000	Mpa
Bending modulus	Bending modulus	23°C	ISO 178	2800	Mpa
bending strength	23°C	ASTM D790	125	Mpa
bending strength	bending strength	23°C	ISO 178	120	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	220	°C
	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/Bf	200	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	75.0	°C
Melting temperature		ISO 11357-3	263	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	1.3	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	2.9	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+15	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	25	KV/mm
Relative permittivity		IEC 60250	2.90
Dissipation factor		IEC 60250	0.030
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
Compared to the anti leakage trace index	Compared to the anti leakage trace index	SolutionB	IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top