PA66 BESTNYL SE00VI01A TRIESA SPAIN
0
- Usages:currency
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 23°C | ISO 527-2 | 75 MPa |
| Elongation at Break | 23°C | ISO 527-2 | 15 % |
| Tensile modulus | 23°C | ISO 527-2 | 2800 MPa |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5 kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Vicat softening temperature | ISO 306/A50 | >235 °C | |
| Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 230 °C |
| 1.80MPaAnnealed | ISO 75-2/Af | 90 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.13 g/cm³ | |
| Shrinkage rate | MD | ISO 294-4 | 1.5 % |
| Water absorption rate | (23°C,24hr) | ISO 62 | 1.8 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+13 Ω.cm | |
| Dielectric strength | IEC 60243-1 | 31 KV/mm | |
| Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 600 V |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hardness (Shore A) | ISO 868 | 80 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.