PA66 S223-G6U DSM HOLAND

Form：Granules | Grade：Enhanced level

Properties:

enhanceGlass fiber reinforced

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Properties:

enhance | Glass fiber reinforced

Certificates

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Fracture stress	5mm/min	ISO 527-1	195	MPa
Fracture strain	5mm/min	ISO 527-1	3.5	%
Tensile modulus	1mm/min	ISO 527-1	10000	MPa
Impact strength of cantilever beam gap	23℃	ISO 180/1A	13	KJ/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ISO 180/1C	65	KJ/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL94	HB
Hot deformation temperature	1.8Mpa	ISO 75-2	250	℃
Hot deformation temperature	Hot deformation temperature	0.45	ISO 75-2	260	℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.36
Water absorption rate	23℃,50%相对湿度	ISO 62	1.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	50Hz	IEC 60250	3.9
Dielectric constant	Dielectric constant	1MHz	IEC 60250	3.5
Dielectric loss	50Hz	IEC 60250	90	E-4
Dielectric loss	Dielectric loss	1MHz	IEC 60250	160	E-4
Volume resistivity		IEC 60093	1E+15	Ohm.cm
Surface resistivity		IEC 60093	1E+15	Ohm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top