PS+PE UPES® 315-FLR
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.980 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.40 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Injection | ASTMD638 | 2040 MPa |
| tensile strength | ASTMD638 | 32.0 MPa | |
| elongation | ASTMD638 | 4.3 % | |
| Flexural modulus | Injection | ASTMD790 | 1880 MPa |
| bending strength | ASTMD790 | 54.0 MPa | |
| Bending strain - Field | ASTMD790 | >5.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | Injection | ASTMD256 | 19 J/m |
| Suspended wall beam without notch impact strength | Injection | ASTMD256 | 820 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTMD15256 | 104 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top