PP Copolymer Ducor® 2600 M Ducor Petrochemicals BV
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.910 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 7.5 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 46.0 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ISO 527-2/50 | 21.0 MPa |
| Tensile strain | Yield | ISO 527-2/50 | 6.0 % |
| Tensile modulus | ISO 527-2/1 | 1150 MPa | |
| Tensile strain | Break | ISO 527-2/50 | >50 % |
| shear modulus | ISO 6721-2 | 550 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 170 kJ/m² | |
| ISO 179/1eU | NoBreak | ||
| ISO 179/1eU | NoBreak | ||
| ISO 179/1eU | NoBreak | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 5.0 kJ/m² | |
| ISO 180/1A | 6.0 kJ/m² | ||
| ISO 180/1A | 8.0 kJ/m² | ||
| ISO 180/1A | 45 kJ/m² | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 45 kJ/m² | |
| ISO 179/1eA | 6.0 kJ/m² | ||
| ISO 179/1eA | 7.0 kJ/m² | ||
| ISO 179/1eA | 9.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 80.0 °C | |
| ISO 75-2/A | 50.0 °C | ||
| vicat | ISO 306/A | 144 °C | |
| ISO 306/B | 58.0 °C | ||
| melting temperature | ISO 3146 | 163 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top