PP PPB-M30-V SINOPEC YANGZI

Form：Granules | Grade：Injection grade

Properties:

High mobilityhigh strengthCopolymer injection gradeHas excellent liquidityGood impact strength and Rapid crystallization ratGreatly shorten the formi

Typical Applications:

Automotive interior partsHousehold applianceschipcontainerThin walled productsAutomotive Interior PartsLarge thin-walled injection molded products such a

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive interior parts \| Household appliances \| chip \| container \| Thin walled products \| Automotive Interior Parts \| Large thin-walled injection molded products such a
Properties:	High mobility \| high strength \| Copolymer injection grade \| Has excellent liquidity \| Good impact strength and \| Rapid crystallization rat \| Greatly shorten the formi

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23℃	GB/T 1043.2-2008	6	kJ/m²
Tensile stress		IEC 60093	25	Mpa
Elongation at Break		IEC 60093	100	%
Bending modulus		GB/T 9341-2008	1250	Mpa
Rockwell hardness		GB/T 9342-2008	85	R
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	GB/T 1634-2004	90	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		GB/T 3682-2000	30	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top