Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.72 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.10到0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Primary Additive | | | 15 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 10300 MPa |
| tensile strength | | ASTMD638 | 41.4 MPa |
| elongation | Yield | ASTMD638 | 5.0到10 % |
| Flexural modulus | | ASTMD790 | 8270 MPa |
| bending strength | | ASTMD790 | 64.1 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 430 J/m |
| Suspended wall beam without notch impact strength | | ASTMD4812 | 800 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ESDSTM11.11 | <1.0E+6 ohms |
| Surface Resistivity | | ASTMD257 | <1.0E+7 ohms |
| Volume resistivity | | ASTMD257 | <1.0E+4 ohms·cm |
| StaticDecay | | FTMS101C4046.1 | <2.0 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 204 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare