PA6 Ravamid® BGF30 T BK45

Properties:
Filler
glass fiber reinforced material
30%
filler by weight
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTMD792,ISO1183	1.34 g/cm³
Shrinkage rate	ASTMD955	0.20到0.75 %
Humidity	ISO960	<0.15 %

flammability	Test Condition	Test Method	Test Result
burning rate		FMVSS302	<100 mm/min
UL flame retardant rating		UL94	HB
UL flame retardant rating	UL flame retardant rating		UL94	HB
Burning wire flammability index		IEC60695-2-12	650 °C

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTMD882,ISO527-2	8200 MPa
tensile strength	Break	ASTMD638,ISO527-2	128 MPa
elongation	Break	ASTMD638,ISO527-2	4.0 %
Flexural modulus		ASTMD790,ISO178	7500 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO179/1eA	10 kJ/m²
Impact strength of simply supported beam without notch		ISO179/1eU	55 kJ/m²
Impact strength of cantilever beam gap		ASTMD256	9.00 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/1A	9.0 kJ/m²

Thermal performance	Test Method	Test Result
vicat	ISO306/B50,ASTMD15251	198 °C
	ISO3146	218 °C
		ASTMD648,ISO75-2/A	188 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top