PC WONDERLITE® PC-175
171
- Properties:High mobility
- Usages:Optical data storage
- Certificates:MSDSRoHSULTDSTDSULMSDSRoHSSVHCProcessingStatement
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Density/specific gravity 2 | ASTMD792 | 1.20 g/cm³ | |
| density | ISO1183 | 1.20 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 62 g/10min | |
| Melt volume flow rate | ISO1133 | 65.0 cm3/10min | |
| Shrinkage rate | ISO294-4 | 0.50to0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTMD785 | 77 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD638 | 61.6 Mpa | |
| Tensile stress | ISO527-2/50 | 60.0 Mpa | |
| ISO527-2/50 | 50.0 Mpa | ||
| elongation | ASTMD638 | 70 % | |
| Tensile strain | ISO527-2/50 | 65 % | |
| Flexural modulus | ASTMD790 | 2340 Mpa | |
| ISO178 | 2400 Mpa | ||
| bending strength | ASTMD790 | 89.8 Mpa | |
| Bending stress 5 | ISO178 | 90.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 10 kJ/m² | |
| Impact strength of cantilever beam gap | ISO180/1A | 8.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO75-2/A | 124 °C | |
| ISO75-2/A | 140 °C | ||
| vicat | ASTMD15256 | 150 °C | |
| ISO306/A50 | 145 °C | ||
| ISO306/B50 | 140 °C | ||
| ISO11359-2 | 6.0E-5to8.0E-5 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top