AS(SAN) CN4800
45
- Certificates:TDS
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 透光率91% | ||
| Color | 透明 | ||
| purpose | 透明容器 |
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| process temperature | 200-220 °C | ||
| 210-230 °C | |||
| screw speed | 30-60 rpm | ||
| Temperature | 50-70 °C | ||
| Melt Temperature | 210-230 °C | ||
| pressure | 5-15 Mpa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 1.8 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 6 % | |
| Tensile modulus | ASTM D638/ISO 527 | 38000 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 69 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 6 % | |
| Rockwell hardness | ASTM D785 | 122 | |
| elongation at break | ASTM D638/ISO 527 | 6 % |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.08 kg·cm/cm(J/M)ft·lb/in | |
| Shrinkage rate | ASTM D955 | 0.2-0.6 % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 50 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Heat distortion temperature | ASTM D648/ISO 75 | 88 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top