HDPE PRIMATOP® HDPE HMW 1000950
0
- Usages:Blow molding applicationsthick wall accessories (components)agricultural water tanks
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D1505 | 0.949 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| Environmental stress cracking resistance | ASTM D1693A | >600 hr | |
| ASTM D1693B | >600 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 24.8 MPa |
| elongation | Break | ASTM D638 | >600 % |
| Flexural modulus | ASTM D790 | 1170 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-90.6 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top