TPE 1170
0
- Properties:Injection molding reference process feeding section temperature150-160 ℃model temperature10-50 ℃middle section temperature170-190 ℃screw speed100-200rminfront section temperature180-220 ℃back pressure01-10MPanozzle temperature180-230 ℃injection pressuremedium high MPaextrusion reference process barrel feeding section temperature 130-150?
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| relative density | 0.97 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | 70 A | ||
| tear strength | 31.5 kN/m | ||
| Elongation | 730 % | ||
| stretching strength | 1.8 MPa | ||
| tensile strength | 8.5 MPa |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Retention rate of elongation at break | 98 % | ||
| Tensile strength retention rate | 104 % | ||
| compression set | 28 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top