PA6

PA6 Adell Polyamide BL-18 ADELL USA

Properties:
Filler glass mineral 40% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C,3.18mm	ASTM D256	45 J/m

mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	137 MPa
elongation	Break	ASTM D638	2.5 %
Bending modulus		ASTM D790	7580 MPa
bending strength		ASTM D790	186 MPa
compressive strength		ASTM D695	186 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	216 °C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	204 °C
	Hot deformation temperature	Hot deformation temperature	Melting Temperature	ASTM D648	216to227 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	1.47 g/cm³
Shrinkage rate	MD	ASTM D955	0.40to0.70 %
Water absorption rate	24hr	ASTM D570	0.70 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M-Scale	ASTM D785	95
Rockwell hardness	Rockwell hardness	R-Scale	ASTM D785	122

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top