HDPE TOTAL Polyethylene HDPE XT10 N

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	0.949 g/cm³
melt mass-flow rate		ASTMD1238	7.5 g/10min

Supplementary Information	Test Method	Test Result
Minimum	ISO9080	10.0 MPa
PENT-Compression Molded	ASTMF1473	>5000
PipeTestCategory	ASTMD2239	C3
Unit classification	ASTMD3350	445574445576

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTMD638	>24.1 MPa
elongation		ASTMD638	>800 %
	Compression Molded	ASTMD790	1030 MPa
NotchPipeTest		ISO13479	>20.8 day
Resistant to rapid crack propagation, Pc		ISO13477	>12.0 bar
Fundamentals of Hydrostatic Design		ASTMD2837	11.0 MPa
Fundamentals of Hydrostatic Design	Fundamentals of Hydrostatic Design		ASTMD2837	6.89 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	430 J/m

Thermal performance	Test Method	Test Result
brittle temperature	ASTMD746	-118 °C
vicat	ASTMD1525	124 °C
	ASTMD3417	131 °C
		ASTMD696	1E-04 cm/cm/°C
			ASTMD648	78 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top