PC+ABS Generic ABS+PC - Carbon Fiber, Nickel-Coated
0
- Properties:Fillernickel plated carbon fiber
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.10to0.25 % | |
| density | ASTM D792 | 1.20to1.40 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 5800to14600 MPa | |
| tensile strength | ASTM D638 | 67.6to99.0 MPa | |
| elongation | ASTM D638 | 0.50to1.5 % | |
| Flexural modulus | ASTM D790 | 5200to13800 MPa | |
| bending strength | ASTM D790 | 95.0to193 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 52to66 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 180to320 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 0.20到1.0E+5 ohms | |
| Volume resistivity | ASTM D257 | 0.030to25 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 99.0to121 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top